PEDAL SALE! Red Panda Lab Remote 4

Tensor remote switch with 4 modes to access presets and pedal functions.  Scribble strips above each switch can be labeled with a Sharpie and erased using isopropyl alcohol.

Connects to the Tensor or Particle 2 via a 1/4″ TRS cable (included).  The Tensor firmware needs to be version 1.1 or later (available here).  The Remote 4 does not require power.

Size: 10″ x 2.75″ x 2.25″ high

Tensor Remote switch modes

Mode	Switch	Function
1	A	Preset 1 (hold to save)
	B	Preset 2 (hold to save)
	C	Preset 3 (hold to save)
	D	Preset 4 (hold to save)
2	A	Left footswitch
	B	Right footswitch
	C	Preset 1 (hold to save)
	D	Preset 2 (hold to save)
3	A	Record / Overdub
	B	Play / Stop
	C	Play Once
	D	Toggle TIME & PITCH (tap) Toggle SPEED (double tap)
4	A	Toggle SPEED knob
	B	Toggle TIME knob
	C	Toggle PITCH knob
	D	Toggle RAND knob

Loop Sampler (Remote Mode 3)

Mode 3 is designed to use the Tensor as a loop sampler with live loop manipulation. Switches A-C control loop record, overdub, play, and retrigger functions. Switch 4 toggles between the current knob settings and the default (normal playback settings). For example, you can set SPEED to reverse and PITCH to -1 octave for instant access to reverse and half-speed effects.  See the user’s manual for complete details.

Configuring the Remote Switch:

1. Start with the pedal powered on and nothing plugged into the CTRL port.

2. Hold the right footswitch while plugging in the remote switch. The right LED will blink yellow 3 times

   to indicate it is in CTRL configuration mode. You can release the right footswitch and begin configu-

   ration immediately.

3. Press one of the buttons on the remote switch to select a mode.

4. Hold the right footswitch for 2 seconds to save the configuration. The right LED will blink green to

   indicate that the configuration has been saved.

DIY Friendly

If you would like to build your own, the schematic is available in our knowledge base.